
Dehumidifier mainly consists of cooler, separator, etc.
Wet air (or exhaust) from the top of the cooler into the walk outside the plate, after cooling, the moisture in the wet air condenses into water, the moisture also extends the surface of the plate to flow downward, and finally the air from the (or exhaust) from the bottom of the cooler to leave, enter the separator, the separator is equipped with a mist eliminator to eliminate moisture and then discharged. Inside the plate, the cooling water goes, in order to improve the dehumidification effect, the inside of the plate can also go to the refrigerant.
Characteristics of system
- Lowest energy consumption and operation cost, electricity consumption of one ton water's evaporation is 2.2kw/℃.
- Temperature difference is small, heating is gentle, the loss of product is less.
- Compact structure and lower building cost; plant area is 50% less than that of traditional evaporator.
- Surrounding is friendly, no gas and no steam.
- Good adaptability in low loading condition, flexibility of operation is good and has a longer service life.
- Consumption of circular water is low and energy saving is obvious.
- No fresh steam is needed.
- Evaporation can be carried out under 40℃ and equipment need not to be frozen, specially suitable for thermal activity products.
Keywords:Evaporator, Crystallizer,Pressure Vessel,Filter
Dehumidifier
Email to us
Categories:
Product inquiry
Filling in your phone and E-mail information will help us to get in touch with you in time and solve your problems as soon as possible.